Setting The Hydrocolloid And Switching It On/Off - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016

Setting the hydrocolloid and switching it on/off

4.6.8.2
Opening Start sub-screen Start program
✔
Start program
The
➢ Touch the
Start
 The
Setting the water flow time
Different cooling times are required, depending on the molding
compound.
✔
Both hydrocolloid connections are plugged into the bottom of the
assistant element.
1. Press and hold the
Hydrocolloid
 The
2. Use the – and + keys to set the flow time.
3. Touch the
Hydrocolloid
 The
Switching the hydrocolloid on/off
✔
Both hydrocolloid connections are plugged into the bottom of the
assistant element.
➢ Touch the
 If the key is highlighted orange, the impression tray water cooling
is activated. When the set flow time has elapsed, an acoustic
signal sounds and the water flow stops.
IMPORTANT
External device connection, additional devices with the hydrocolloid switched on
The flow of the water pump is limited.
The flow and cooling are insufficient when hydrocolloid and accessories
with water consumption are used at the same time.
➢ No additional accessories with water consumption may be used
during hydrocolloid operation.
is displayed on the touchscreen.
Sub-screen
key.
sub-screen is displayed.
Hydro
key (> 2 s).
settings screen is displayed.
Return
key.
settings screen is hidden immediately.
Hydro
key briefly (< 2 s).
4 Operation
4.6 Assistant element
157