Sirona teneo Operating Instructions Manual page 130

4 Operation
4.5 Dentist element
130
✔
The corresponding settings are made.
✔
Implantology program
The
➢ Press and hold the
 An audible signal sounds. The settings you have made will be
saved for every work step and the entire treatment session.
4.5.15.2.7 Preparing the dental treatment unit for sterile operation
The requirements for sterile operation must be fulfilled for surgical
procedures. It is recommended to work exclusively with the cursor control
to avoid touching the user interface.
Covering the dentist element with a sterile drape
The dentist element can be covered with a surgical drape to allow for
sterile operation. A rectangle must be cut out of the drape to allow for
operation and visibility of the EasyTouch.
Use of separate motor holder
Since the instrument holder of the dentist element is inaccessible due to
the surgical drape, the burr drive being used can be deposited in a
separate motor holder. This separate holder is placed on top of the dentist
element.
The motor holder can be sterilized.
To reorder the motor holder, see "Spare parts and consumables" [ → 266].
The Implant motor becomes the active instrument as soon as the hose of
the implantology instrument is connected to the dentist element.
Attaching the instrument hose cover
The instrument hose of the burr drive used can be covered with a sterile
paper sleeve. The instrument hose sleeves can be ordered from a
specialized dealer.
Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
is displayed.
Memory
key (> 2 s).
D3509.201.03.03.23 10.2016
65 48 510 D3509