Sirona teneo Operating Instructions Manual page 283

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
Accepting an order
Accepts an order that was placed and is waiting in SIDEXIS, e.g. for
creating an intraoral image with the X-ray unit of the dental treatment unit
or a video recording with the intraoral camera.
Readiness for intraoral X-ray exposure
Establishes readiness for an X-ray exposure. A SIDEXIS window then
opens where the image type can be selected and the image can be
described in detail.
Zoom in/out
This magnifies and decreases the active image window and the size of
the image displayed in it on the SIVISION monitor.
Cascaded layout
The opened windows are "cascaded", i.e. arranged slightly displaced
behind one another. All image window titles are thus visible.
Overview layout
The opened image windows are scaled in the display area so that no
scroll bars or as few scroll bars as possible must be displayed. The image
windows are arranged without overlapping.
Rotate image
Rotates the image 90° counterclockwise or clockwise. With SIDEXIS 4,
the image can be rotated 180° by pressing a key.
Contrast optimization filter
This image filter analyses and optimizes the current grayscale distribution
of an image. In this way, for instance, details within a very low-contrast,
"faint" image can be made visible.
Relief display filter
Image details with high contrast are displayed brighter or darker. Thus
edges or contours within the image are clearly accentuated. The result is
a relief-like image distortion.
Cancel/confirm entry
Status overview layout
The opened image windows are arranged according to their anatomical
position if the number of the displayed tooth was specified. Unassigned
exposures are displayed in the center of the display area. The size of the
windows is adapted so that the complete exposures are visible.
Invert image
This function inverts the brightness values of the image pixels, thus
enabling a positive or negative display of the image. The inversion can be
canceled by pressing the key once again.
10 Overview of all function keys
10.6 SIVISION program
283