Sirona teneo Operating Instructions Manual page 289

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
10.7.4 Instruments
Configure instruments
Instruments
Opens the
Quick setting keys/Function levels
The settings in the instrument programs can be made either via static
quick setting keys (with the key values 0.09, 10, 20, 30, 40 or 1, 25, 50,
75, 100), via the programmable quick setting keys (with changeable key
values) or via the function levels (E1, E2).
When using the static quick setting keys, you can choose one of two
options for saving the settings you made in the instrument program:
● SaveMode – The
programs:
The settings made in the Instrument program will be saved after the
instrument is placed in its holder only if the Memory key was pressed
and held beforehand (> 2 s).
● DropMode –
When the instrument is deposited, the settings made in the
Instrument program will automatically be saved.
One of the following presettings can be selected:
● Field 1: Static quick setting keys with SaveMode
● Field 2: Static quick setting keys with DropMode
● Field 3: Function levels
● Field 4: Programmable quick setting keys
"External HF surgical unit" key
External HF surgical units may interfere with the dental treatment unit and
SIVISION monitor. Therefore, the
displayed on the
highlighted in orange, the dental treatment unit is protected from
interferences by HF fields.
Afterblow
After an instrument is put in its holder, the cooling spray remaining in the
instrument head or in the tip of the instrument is automatically blown out
by briefly activating the chip blower.
Spray temperature
The spray temperature of all instruments on the dentist element is
adjustable. The SPRAYVIT tool is adjusted separately.
The spray temperature of the SPRAYVIT M multifunctional syringe must
be adjusted separately, see "SPRAYVIT screen" [ → 280].
setup program.
Memory
key is displayed in the Instrument
Memory
key hidden in Instrument programs:
External HF surgical units
Start
sub-screen. If the key on the sub-screen is
10 Overview of all function keys
10.7 Setup program
key may be
289