Start Program Operating Modes; Sirona Dental Systems Gmbh - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH

Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
4.2.2

Start program operating modes

After the dental treatment unit is switched on, the
automatically appears.
The Start program can run in the following three operating modes:
● Simple Start program
● Advanced Start program
● EasyMode Start program
In the operating mode
program
, the functions of the patient chair and instruments are each
shown on separate screens. In the
mode, the patient chair and instrument functions that are most important
for the treatment are shown together on the same screen.
You can set the operating mode that you want to work with in the dental
treatment unit setup, see "Select Start program operating mode" [ → 189].
The operating modes are described in detail below:
Simple Start program
Simple Start program
In the
function keys and, if present, the
displayed on the screen. The full range of functions of the dental
treatment unit can be used in this operating mode.
Simple Start program operating mode
All other chair functions are listed separately on the
Adjustment
screen. This can be accessed via the
Adjustment
key.
Manual Chair Adjustment screen (for Simple Start program mode only)
4.2 Operating concept of the touchscreen
Simple Start program
and
EasyMode Start program
operating mode, only the chair program
Move headrest in/out
4 Operation
Start program
Advanced Start
operating
function keys are
Manual Chair
Manual Chair
47