Setting The Brightness And Sensor Control Of The Ledview; Setting The Brightness, Color Temperature And Sensor Control Of The Ledview Plus - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
touchscreen. The distance at which the contactless sensor will react to
movements can also be adjusted.
4.10.2

Setting the brightness and sensor control of the LEDview

1. Press and hold the
(> 2 s).
 The settings screen of the operating light is displayed on the
touchscreen.
2. Use the – and + keys to set the desired brightness of the operating
light (5 levels). The – key decreases the brightness and the + key
increases it.
3. Touch the
 If the key is highlighted in orange, the operating light can be
controlled with the contactless sensor. The keys for adjusting the
operating distance are displayed.
4. Use the – and + keys to set the desired operating distance of the
contactless sensor (5 levels). The – key decreases the operating
distance and the + key increases it. You can try out the setting on the
operating light without leaving the setting program. The setting
should be selected so that the contactless sensor cannot be operated
unintentionally.
5. Touch the
 The key is no longer highlighted in orange and the keys for
adjusting the operating distance are faded out.
4.10.3 Setting the brightness, color temperature and sensor
control of the LEDview
1. Press and hold the
(> 2 s).
 The settings screen of the operating light is displayed on the
touchscreen.
Operating Light
fixed key on the dentist element
Sensor control
key.
Sensor control
key again to switch off the sensor control.
PLUS
Operating Light
fixed key on the dentist element
4 Operation
4.10 Operating light
167