Dental Unit Plugin "Patient-Specific Chair Programs - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
4.4.10 Sirona Dental Unit plugin "Patient-specific chair
programs"
With SIDEXIS 4, practitioners can save the patient-specific chair
positions for each patient using the program keys (S, 0, 1, 2, and if
applicable 3, 4). The next time the patient is logged in, the chair positions
are available again. For this, SIDEXIS 4 and the Sirona Dental Unit
plugins must be installed on the PC.
Activate and retrieve patient-specific chair programs
✔
The Sirona Dental Unit plugin "patient-specific chair programs" is
installed on the PC and activated. For more details, refer to the
"Sirona Dental Unit plugins" user manual.
✔
A patient is registered in SIDEXIS 4. The last name of the patient is
shown in the start program. If the last name is too long for the display,
a symbol is shown instead.
✔
Start dialog
The
1. Touch the
 If the key is orange, the
is activated.
 If chair positions are already saved in SIDEXIS 4 for the
registered patient, a patient symbol will be displayed on the
respective program keys.
2. Touch key S, 0, 1, 2 or, if applicable, 3, 4 briefly (< 2 s). You can set
whether the chair programs 3 and 4 should be displayed in the chair
dialogue, see "Show/hide chair programs 3 and 4" [ → 189].
 If a patient symbol is shown on the pressed program key, the
patient-specific chair program saved in SIDEXIS 4 will be
activated. If there is no symbol on the key, the chair program
saved in the active user profile of the dental treatment unit will be
activated.
3. Switch the function on/off to switch between the two operating
modes.
is displayed on the touchscreen.
Patient-specific chair programs
Patient-specific chair programs
4 Operation
4.4 Patient chair
briefly(< 2 s).
function
73