Implantological And Endodontic Treatments; Treatment Selection - Sirona teneo Operating Instructions Manual

4 Operation
4.5 Dentist element
122
4.5.15

Implantological and endodontic treatments

The treatment functions support implantology and endodontic treatments.
The speed and torque of the rotating instrument can be precisely adjusted
and saved for later reference, if desired. This is possible for every work
step for implantology treatments. A selection of the most popular file
systems with the speed and torque values recommended by the
manufacturer is provided for endodontic treatments. The file composition
and sequence can be set by the user. If the dental treatment unit is
equipped with the ApexLocator option, this can be used for endodontic
treatments.
The dental treatment unit enables the management of two implantology
treatments and up to five endodontic treatments with individual settings
for each user profile.
The treatment functions can only be used in conjunction with the precisely
adjustable brushless motors. If the adjacent display appears when the
treatment function is switched on (see below), the software has detected
that the burr drives marked with a warning triangle are not suitable for
treatment purposes. In this case, please contact your dental depot.
In order to supply the burr drive with a sterile saline solution during
implantology treatments, a peristaltic pump must be attached to the
dentist element; see "Preparing for use of NaCl saline solution" [ → 91].
The Treatment function can only be accessed in the
program
operating mode.

Treatment selection

4.5.15.1
Switching the function on and selecting the treatment
Treatment selection
In the
and "Implantology" are specified in two separate lists. The required
treatment is selected from these lists.
Treatment, pencil symbol
IMPORTANT
Pencil symbol
Endodontic treatments that were created or edited by the user are
marked with a pencil symbol. Please note that changes to the file
settings may have been made during these treatment sessions. E.g.,
outside files may have been added to or existing files may have been
removed from the sequence or the values recommended by the
manufacturer may have been altered.
Endodontic treatments with reciprocal rotating files are marked by a lock
symbol. The sequence of files and the preset values recommended by
the manufacturer cannot be changed.
✔
Start dialog
The
1. Touch the
Treatment Selection
 The
program, the treatment types "Endodontics"
is displayed on the touchscreen.
Treatment
key.
screen is displayed.
Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
Standard Start
65 48 510 D3509
D3509.201.03.03.23 10.2016