Switching The Composite Function On/Off - Sirona teneo Operating Instructions Manual

4 Operation
4.10 Operating light
168
2. Use the – and + keys to set the desired brightness of the operating
light (7 levels). The – key decreases the brightness and the + key
increases it.
3. Use the – and + keys to set the desired color temperature of the
operating light (3 levels). The – key decreases the color temperature
and the + key increases it.
4. Touch the
 If the key is highlighted in orange, the operating light can be
controlled with the contactless sensor. The keys for adjusting the
operating distance are displayed.
5. Use the – and + keys to set the desired operating distance of the
contactless sensor (5 levels). The – key decreases the operating
distance and the + key increases it. You can try out the setting directly
on the operating light without leaving the setting program. The setting
should be selected so that the contactless sensor cannot be operated
unintentionally.
6. Touch the
 The key is no longer highlighted in orange and the keys for
adjusting the operating distance are hidden.
4.10.4

Switching the composite function on/off

The composite function is used to prevent premature curing of composite
materials.
➢ Press the
element.
 If the composite function is switched on, the LED of the
Composite function
assistant elements.
Sensor control
key.
Sensor control
key again to switch off the sensor control.
Composite function
fixed key on the dentist or assistant
fixed key lights up on the dentist and
Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016