Check The Message System Of The Amalgam Separator - Sirona teneo Operating Instructions Manual

5 Care, cleaning and maintenance by the practice team
5.5 Components of the water unit
240
5.5.7

Check the message system of the amalgam separator

An electronic control monitors the function of the amalgam separator. It
detects any mechanical blocking or failure of the drive motor. The error is
indicated by the
signal.
The functionality of this message system must be checked at least once
per year.
Inform your service technician if the error occurs during regular operation.
In Germany: Document the test in the operation log of the amalgam
separator in the "Testing the function of display and message systems"
section.
✔
All instruments are in their holders. The Start program is displayed on
the touchscreen.
1. Press and hold the
Setup dialog
 The
2. In the setup dialog, hold and press the
 The service dialog is shown.
3. Test the message system. Press and hold the
extended period.
 The message system is working if a signal sounds as long as the
Amalg
key is pressed.
Inform your service technician if the acoustic signal does not sound.
Back
Press the
Operating Instructions (USA) TENEO
Amalg
display on the touchscreen and by an acoustic
Setup
fixed key (> 2 s).
appears.
key to exit the service dialog.
Sirona Dental Systems GmbH
Service
key (> 2 s).
Amalg
key for an
65 48 510 D3509
D3509.201.03.03.23 10.2016