Timer Function; Chair Programs; Headrest; Composite Function - Sirona teneo Operating Instructions Manual

Hide thumbs Also See for teneo:
Table of Contents

Advertisement

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
Alternatively, the
used to activate the bell or hash key, e.g. if neither an X-ray viewer or a
SIVISION monitor is available. See also "Setting the x-ray viewer key on
the assistant element" [ → 193].
X-ray viewer
➢ Press the
X-ray viewer
 If the
SIVISION monitor, the LED in the key is not lit when the white
screen is switched on. It is lit only when the X-ray viewer is
switched on. The
Start
the
If the X-ray viewer key on the assistant element is set to activate
the bell or hash key relay, the LED on the key is lit up when the
function is activated.
4.6.4.4

Timer function

The dental treatment unit features six timers which can be preset on the
dentist element; see "Timer function." [ → 78] Only the first timer can be
triggered on the assistant element.
Timer
1. Press the
 Timer 1 is started. The preset and elapsed times are displayed in
the status bar on the touchscreen.
Timer
2. Press the
 The previously timer stops and is reset to zero.
4.6.4.5

Chair programs

The following chair programs can be selected and programmed on the
assistant element:
● Mouth rinsing position (S)
● Entry/exit position (0)
● Chair programs 1 and 2
For details, see "Moving the patient chair via chair programs" [ → 66].
Chair programs can also be programmed from the assistant element side;
see "Programming chair programs and shock positioning" [ → 72].
4.6.4.6

Headrest

The treatment chair is adjusted to the patient's stature by moving the
headrest in or out.

Composite function

4.6.4.7
The composite function is used to prevent premature curing of composite
materials.
Composite Function
➢ Press the
 If the composite function is switched on, the LED on the fixed key
lights up on the assistant and dentist elements.
X-ray viewer
key on the assistant element can also be
key.
key is set to the white screen function on the
white screen
key is also not colored orange in
program.
fixed key on the assistant element.
fixed key again.
fixed key.
4 Operation
4.6 Assistant element
147

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Teneo

Table of Contents