4 Operation
4.15 Configuration of the dental treatment unit (setup)
190
Showing/hiding the fine adjustment key
4.15.4.4
Depending on the type of treatment, it may be necessary to adjust the
patient chair more slowly and more precisely (e.g., for tiny corrections in
case of treatment under a microscope). In this case, the
key can be displayed in the
there, the patient chair carries out the following movements at reduced
speed:
● OrthoMotion – Tilting the patient chair
● ErgoMotion – Tilting the patient couch and inclining the backrest
● Adjusting the chair height
Chair program travel movements are always executed at maximum
speed.
➢ Touch the
If the key is highlighted orange, the
displayed in the
Adjustment
4.15.4.5
Setting the cursor control
The cursor control can be set as follows:
● Field 1: Cursor control switched off
● Field 2: Cursor control switched on, without screen change
● Field 3: Cursor control switched on, with screen change:
For more information, please refer to "Using the cursor control" [ → 55].
✔
A cable foot control is connected to the dental treatment unit or a
wireless foot control is registered on the dental treatment unit; see
"Setting the wireless foot control on the dental treatment unit" [ → 52].
➢ Touch the
The selected field is highlighted orange.
4.15.4.6
Preselecting the number of user profiles
If fewer user profiles are required, their number can be limited so that only
the specified users can be selected after the dental treatment unit is
switched on.
➢ Use the – and + keys to set the number of user profiles.
If the number of user profiles is limited to one, the
hidden in the start dialog.
Start program
Fine Adjustment
key.
Advanced Start program
screen.
Cursor control
key.
Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
Fine Adjustment
. If this function is activated
Fine Adjustment
key is
Manual Chair
and in the
User profiles
key is
65 48 510 D3509
D3509.201.03.03.23 10.2016