Automatically Purge Water Lines (Autopurge Function) - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
max.
65 48 510 D3509
D3509.201.03.03.23 10.2016
5.3.3

Automatically purge water lines (autopurge function)

The AutoPurge function enables automatic purging of all water-carrying
instruments in the dentist element, of the SPRAYVIT M multifunctional
syringe in the dentist and assistant elements and of the suction hoses and
the tumbler filling.
All of the instruments inserted in the water unit are purged when the
AutoPurge function is activated. If the instruments remain in the water unit
after the dental treatment unit is switched off, the purging process will
automatically be started again the next time the dental treatment unit is
switched on.
Execute the AutoPurge function:
● Before starting work
● At the end of the work day
When the dental treatment unit is switched to stand-alone water supply
mode, the AutoPurge function is no longer available (key hidden). It is still
possible to purge individual instruments; see "Purging water lines (purge
function)" [ → 210].
Preparation
The following preparations must be made before you start purging the
water lines:
1. If your dental treatment unit is equipped with a cuspidor, activate the
cuspidor flushing for at least one minute. This flushes the water lines.
2. Set all bur drives and the SIROSONIC TL scaler to the maximum
water flow rate.
3. Put all instruments in place.
4. Do not remove the tumbler holder from the cuspidor. Place the empty
tumbler under the tumbler outlet.
Opening the AutoPurge screen
✔
Start dialog
The
Sub-screen
1. Touch the
Start
 The
AutoPurge function
2. Touch the
5 Care, cleaning and maintenance by the practice team
5.3 Instruments and instrument hoses
is displayed on the touchscreen.
key.
sub-dialog is displayed.
key.
213