Maintenance And Repair; Trouble-Free Operation; Vacuum System - Sirona teneo Operating Instructions Manual

2 Safety information
2.7 Maintenance and repair
Authorized technical personnel and
spare parts
Maintenance intervals
18
The dental treatment unit has the "DVGW" label next to the rating plate.
Please comply with the national requirements with regard to connecting
dental treatment units to the public drinking water system.
2.7

Maintenance and repair

As manufacturers of dental medical units and in the interest of the
operational safety of your system, we stress the importance of having
maintenance and repair of this unit performed only by ourselves or by
agencies expressly authorized by us. Furthermore, faulty components
must always be replaced with original spare parts.
We suggest that you request a certificate showing the nature and extent
Certificate, with modification note
of the work performed from those who carry out such work; it must contain
any changes in rated parameters or working ranges (if applicable), as well
as the date, the name of the company and a signature.
Despite the outstanding quality of your dental treatment unit and regular
care by the practice team, in the interest of operational safety, it is
essential to have preventive maintenance performed at scheduled
intervals.
In order to ensure the operational safety and reliability of your dental
treatment unit and to avoid damage due to natural wear, as the system
owner you must have your system checked regularly by an authorized
service technician from your dental depot. Furthermore, safety checks
must be performed. Please contact your dental depot to obtain a
maintenance offer. For more information, please refer to "Maintenance by
the service engineer" [ → 261].
2.8

Trouble-free operation

Use of this unit is permissible only if it works properly without
malfunctions. If trouble-free operation cannot be ensured, the unit must
be taken out of service, checked by authorized technicians for
malfunctions and, if necessary, repaired or replaced.
2.9

Vacuum system

The suction removal of aluminum and other metal oxides from blasting
Suction of aluminum or other metal oxides prohibited
devices via the amalgam separator and the automatic separator installed
in the dental treatment unit is prohibited! This would result in extreme
wear and clogging of the vacuum and drain lines.
A separate vacuum system must be used in connection with metal oxide
Separate suction
blasting devices. dental treatment units equipped with a central standard
wet suction are generally suitable for suction removal of the above
material. However, make sure to observe the instructions provided by the
manufacturer of your vacuum system.
No restrictions apply when using salt blasting devices in connection with
Suction of steel abrasives permissible
Sirona dental treatment units. However, in such cases, make sure that
the system is subsequently flushed with an adequate amount of water.
Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016