7 Operation
7.1 Setting the acquisition system to 3D camera
40
7
Operation
CAUTION
After each use
Reprocess the camera after each patient.
➢ Follow the instructions in chapter „CEREC Bluecam [→ 51]" in
order to avoid cross-contamination between patients.
Setting the acquisition system to 3D camera
7.1
IMPORTANT
These settings only apply to software version 3.8.
ü To use the 3D camera, the acquisition system must be set to "3D
camera" .
ü You can only execute the following settings if the "Settings" menu is
changed to "Master Mode" .
1. In the menu line, select the command "Settings" / "Configuration" /
"Acquisition system" .
Ä The "Configuration" window appears.
2. Select "3D camera" and confirm with "OK" .
Ä The 3D camera will remain selected until it is set back to "Scanner"
or "inEos" .
Sirona Dental Systems GmbH
Operating Instructions CEREC AC