Sirona teneo Operating Instructions Manual page 275

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
10.3
Instrument program
Static speed quick setting keys
Quick setting keys without HF surgery
Setting preset or intermediate speeds
min. 90 rpm, max. 40,000 rpm
Static intensity quick setting keys
Setting preset or intermediate intensity values for the SIROSONIC TL
scaler
Programmable speed quick setting keys
Adjusts and saves the speed of the electric motor and also preselects and
activates the coolant
min. 90 rpm, max. 40,000 rpm
Programmable intensity quick setting keys
Adjusts and saves the intensity of the SIROSONIC TL scaler and also
preselects and activates the coolant
Memory key
Used to save instrument settings
This key is displayed only in the Save mode with static quick setting keys.
Storage occurs automatically when the instrument is deposited in the
Drop mode.
Function levels
Storage and selection of instrument settings at two levels
Direction of rotation
Switches counterclockwise rotation ON/OFF
Boost function
Increases the intensity setting of the SIROSONIC TL scaler in steps of 20,
referenced to the final value during treatment. After an intensity of 80 is
reached, only the maximum value of 100 can be selected.
Endodontics function
Activation of the endodontics function for the SIROSONIC TL scaler
(power limitation)
Chip blower
Used to dry treatment areas or blow off drilling chips by emitting air blasts
from the treatment instrument
This key is displayed only when cursor control is activated
Activate preselected coolant
The coolants to be available for selection in the Instrument program can
be set in the sub-screen of each individual instrument, see below.
10 Overview of all function keys
10.3 Instrument program
275