Shock Positioning - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
–
3. Use the and
Increments:
From 00:05 to 1:00 = 5 s steps
From 1:00 to 3:00 = 10 s steps
From 3:00 to 9:30 = 30 s steps
4. Select whether the time loop and the acoustic signal should be
activated/deactivated for the selected timer. Touch the
and/orAcoustic Signal
 If a function is switched on, the corresponding key is highlighted
orange.
5. Select another timer for adjustment or close the settings screen with
Return
the
 All settings are automatically saved when the screen is closed.
Starting the timer
Timer
1. Press the
 The last timer used is started immediately. The set and elapsed
time are displayed in the status bar. The
remains visible.
2. If you wish to use a different timer, touch one of the timers at the lower
edge of the screen.
 If the expired time is less than the new setting of the timer, the
new time will be shown in the status bar. The previously started
timer will not be reset to zero.
3. Optional: You can switch the time loop and/or acoustic signal on/off
while the timer is counting down. Touch the
Acoustic Signal
 If a function is switched on, the corresponding key is highlighted
orange.
Stopping/resetting the timer
Timer function
When the
stopped by pressing the
timer will be reset to zero.

Shock positioning

4.5.4.3
Immediately moves the patient chair to a position for shock positioning of
the patient.
To program the position of the shock positioning function, see "Creating
TENEO reference
chair programs and shock positioning" [ → 72]
+
keys to set the required time.
key
.
key.
fixed key briefly.
key.
screen is deactivated, the timer can also be
Timer
fixed key. If the screen is activated, the
4 Operation
4.5 Dentist element
Time Loop
Timer function
screen
Time Loop
and/or the
79