Sirona teneo Operating Instructions Manual page 252

5 Care, cleaning and maintenance by the practice team
5.7 Sanitation
252
IMPORTANT
Pinching the instrument hoses
Be careful not to pinch the instrument hoses when inserting the
instruments.
If the hoses are pinched, the water flow will be obstructed during
purging.
 The receptacles for the water-carrying instruments and suction
hoses are completely assembled.
Start
5. Touch the key on the touchscreen.
Sanitation phase 2 – Checking the water flow
First, the dental treatment unit checks whether there is water flow through
the instruments.
✔
Sanitization phase 2 is highlighted on the touchscreen.
➢ Wait briefly until the water flow has been checked.
 If sufficient water flow is present, the dental treatment unit
continues with sanitation phase 3.
Error message: No water flow
If the dental treatment unit detects no water flow through an instrument or
through the tumbler filler, you can try to restore water flow. If this is not
possible, the instrument concerned can be excluded from the sanitation
process.
1. Check the water flow through the instruments in the instrument
positions marked with a warning triangle on the touchscreen. Set the
instruments to maximum water flow. Leave all instruments plugged
into the water unit.
 If the dental treatment unit detects the water flow, the warning
triangle will disappear. If there is sufficient water flow through all
instruments, sanitation phase 3 automatically continues.
2. If you want to exclude the instruments concerned from sanitation,
Exclude instrument
touch the
 The dental treatment unit continues with sanitation phase 3. The
water lines you excluded are not included in the sanitation
process.
If it is impossible to restore the flow to the tumbler filling unit, sanitation is
not possible. The tumbler filling unit cannot be excluded from the
sanitation process.
Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
key.
65 48 510 D3509
D3509.201.03.03.23 10.2016