Sirona teneo Operating Instructions Manual page 162

4 Operation
4.7 Water unit
162
Start
 In the sub-screen, the
The waterline treatment system is now changed to stand-alone
water supply.
If the dental treatment unit is changed to stand-alone water supply, in the
Start Sanitizing
sub-program, the
Without waterline treatment solution, it is not possible to sanitize the
water lines interactively. The dental treatment unit must be sanitized
manually, see "Sanitizing the dental treatment unit manually" [ → 256].
The purge function must be used to rinse the instruments, see "Purging
water lines" [ → 210].
Resetting waterline treatment system for operation with public
drinking water and waterline treatment solution
Resetting the waterline treatment system to public drinking water is
similar to changing to stand-alone water supply. Instead of the
water Refilling waterline treatment solution
display, the
on the touchscreen.
➢ Sanitize the water lines after switching to the public drinking water
supply, see "Interactive sanitization of the dental treatment unit"
[ → 248].
Level control
Refill water Refill waterline treatment solution
If the or
during the treatment, the reservoir is almost empty (< 300 ml). By
Return
pressing the key, the display can be hidden and the treatment can
be continued. Refill the tank as soon as possible.
IMPORTANT
Water unit, tank for waterline treatment solution < 300 ml
300 ml are approximately sufficient for:
➢ 5 min. spray operation (motor, turbine, SIROSONIC TL) or
➢ 2 min. SPRAYVIT operation or
➢ 4 x tumbler fillings
The actual values depend on the instrument types and settings used.
Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
Aqua
key is highlighted in orange.
Autopurge
and keys are hidden.
display appears
display appears
65 48 510 D3509
D3509.201.03.03.23 10.2016
Refilling