Tray - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
4.8

Tray

Maximum load capacity
The maximum load is 1 kg (2.2 lbs).
Removing the tray
1. Hold the tray tightly.
2. Open the lock by swiveling the lever downwards.
3. Remove the tray.
4. Let the lever fall back into its original position.
To insert the tray, simply guide it into the mount. The mechanism locks
automatically.
Tray, Tray Holder
CAUTION
If the tray is not locked in place, it can disengage from the tray holder.
➢ After installing the tray, make sure it is securely attached to the tray
holder.
Adjusting the height of the tray
The tray is supported to rotate on a height-adjustable support arm.
NOTICE
Support arm
A locking brake blocks the height adjustment.
The support arm may be damaged if you adjust the height with the
locking brake applied.
➢ Never, under any circumstances, try to adjust the support arm with
the locking brake securely tightened. Release the locking brake first.
1. Loosen the brake knob A slightly.
2. Set the tray to the desired position.
3. Retighten the brake knob slightly.
 The tray can thus be subjected to different loads within limits
without lowering its position.
4 Operation
4.8 Tray
163