Triggering An Immediate Movement Stop; Sirona Dental Systems Gmbh - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH

Operating Instructions (USA) TENEO
S
0
65 48 510 D3509
D3509.201.03.03.23 10.2016
4.4.3

Triggering an immediate movement stop

You can stop the movement of the chair to a programmed position as
follows:
➢ Press the main switch or the
dentist element.
➢ Press a button relating to the patient chair on the touchscreen or a
button to tilt the motor-driven headrest.
➢ Press one of the patient chair keys on the control panel of the
assistant element.
➢ With all instruments are in place press the pedal or the left or right
button of the foot control.
➢ With an instrument removed, press the pedal of the foot control.
➢ With the cursor control switched off, actuate the 4-way foot control
plate on the foot control in any direction.
➢ With the cursor control switched on, move the cursor to any of the
keys relating to the patient chair.
➢ Move the 4-way foot switch in any direction.
➢ Actuate one of the 4-way switches on the motor-driven headrest in
any direction. Exception: The upper 4-way switch up/down, see note
below.
 All movements of the dental treatment unit are stopped immediately.
IMPORTANT
Headrest, motor-driven, movement stop
The function keys and switches for adjusting the headrest to the height
of the patient can be used during the program run. This does not trigger
a movement stop.
4.4 Patient chair
Shock positioning
fixed key on the
4 Operation
61