Sirona teneo Operating Instructions Manual page 74

4 Operation
4.4 Patient chair
74
Save patient-specific chair programs
Patient-specific chair programs are programmed the same way that
conventional chair programs are, see section "Program chair programs
and shock positioning" [ → 72]. The headrest angle, switching the
treatment light on/off, and the position of the dentist element on the
motor-driven sliding track are also saved.
✔
patient-specific chair programs
The
✔
The patient chair is in the desired position.
➢ Press and hold the desired program key (S, 0, 1, 2 or, if applicable,
3, 4) (> 2 s).
 An acoustic signal sounds. The settings are now stored in the
SIDEXIS 4.
With SIDEXIS 4, the last height of the motorized headrest that was set
can be saved and then automatically activated when the patient is logged
in again, see "Sirona Dental Unit plugin for automatic headrest
adjustment" [ → 65].
Delete patient-specific chair programs
The patient-specific chair programs saved in the SIDEXIS 4 can be
overwritten or deleted by reprogramming the program key. After deleting,
the patient symbol on the program key will be hidden. When the key is
touched, the chair program saved in the active user profile of the dental
treatment unit will be activated in both operating modes.
✔
Start dialog
The is displayed on the touchscreen.
Patient-specific chair programs
1. Press and hold the
Delete patient-specific chair programs
 The
the touchscreen.
2. To delete individual patient-specific chair programs, touch the
program keys to be deleted. Then touch the
dialogue.
3. To delete all patient-specific chair programs for the particular patient,
Delete all patient-specific chair programs
touch the
 The dialogue will be hidden. The patient symbols are removed
from the program keys in the start dialogue.
Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
function is activated.
key (> 2 s).
dialogue appears on
Back
key to hide the
key.
65 48 510 D3509
D3509.201.03.03.23 10.2016