Sirona teneo Operating Instructions Manual page 217

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
5 Care, cleaning and maintenance by the practice team
Purging water lines
The removed instruments are purged with water for the duration of the set
AutoPurge time. Afterwards, the tumbler filler is purged and the suction
hoses are cleaned. The progress bar displayed on the touchscreen refers
to the entire AutoPurge program, not to the set instrument purge time.
Following the purging process and suction hose cleaning, the display
Deposit instruments
appears.
Displays in the event of incomplete purging process
The AutoPurge program can determine whether the purge process for all
instruments and the tumbler filling has been completed. Errors that
occurred during flushing are displayed on the touchscreen using a
warning triangle.
Leave the AutoPurge function active for the next working day or end it
You can now continue in one of two ways:
● Leave the instruments in the water unit
The AutoPurge function remains activated provided the
keys are not pressed.
The instruments remain in the water unit and the dental treatment unit
can be switched off. The next day, the AutoPurge function is
automatically performed again on all of the instruments remaining in
the water unit as well as on the tumbler filling unit and the suction
hoses are cleaned again immediately after the dental treatment unit
is switched on.
Then you can prepare the dental treatment unit for daily practice
operation.
If the dental treatment unit is out of operation over a prolonged period
of time, you can briefly switch it on every day and then switch it off
again when the purging process is finished. This ensures that the
number of microorganisms in the water lines will not increase
excessively. Empty the rinsing tumbler after each purging process
and place the empty tumbler again below the tumbler outlet.
5.3 Instruments and instrument hoses
Stop
or
Back
217