Setting The Massage/Active Lumbar Support Functions - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
4.4.11

Setting the Massage/Active lumbar support functions

The patient chair can be set to a gentle massage function and/or an active
lumbar support function.
Opening Start sub-screen
Start program
✔
Start program
The
➢ Touch the
Start
 The
Switching the massage function on/off
➢ Touch the
 If the key is highlighted orange, the Massage function is
activated.
Setting the active lumbar support
➢ Adapt the active lumbar support to the patient's spinal curvature.
Touch the
support
keys.
IMPORTANT
Switching the massage/active lumbar support function on/off automatically
Auto on/off of the massage/active lumbar support function
The massage and active lumbar support functions automatically switch
off when the chair approaches the entry/exit position
rinsing position
mouth rinsing position S
If the
see "Using the last position memory function" [ → 67]), the massage
function is switched back on following the chair movement. The active
lumbar support can then be readjusted.
is displayed on the touchscreen.
Sub-screen
key.
sub-screen is displayed.
Massage Function
key.
Decrease active lumbar support
(S)
.
button is pressed again (Memory function,
4 Operation
4.4 Patient chair
Increase active lumbar
/
(0)
or the mouth
75