Placing The Instruments In Their Holders - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
4.5.7

Placing the instruments in their holders

Automatic opening of instrument dialogs
Simple/Advanced Start program
In the
program of the instrument removed is displayed automatically on the
touchscreen. In the
the speed or intensity values of the removed instrument.
Therefore, always make sure that all instruments are placed in the correct
instrument holders. If any instruments are placed in the wrong holders,
the wrong instrument dialog will be opened when they are removed from
the holders.
If more than one instrument is removed, the screen of the instrument
removed first is displayed.
Ball stopper
A ball stopper for an unoccupied instrument holder is attached to the
Ball stopper, attached to the unit
dentist element.
Insert the ball stopper in an unassigned instrument holder. This prevents
accidental deposit of an instrument in this holder.
To reorder the ball stopper, see "Spare parts and consumables" [ → 266].
Instrument hoses
NOTICE
Instrument hoses
The instrument hoses contain electrical cables and media pipes.
Over-tensioning or pinching the hoses may cause the electrical cables
to break and the media pipes to leak.
➢ Ensure that you do not pull or bend the instrument hoses too much.
operating modes, the instrument
EasyMode Start program
4 Operation
4.5 Dentist element
the touchscreen will display
87