Sirona teneo Operating Instructions Manual page 279

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
AutoReverse function
When the set torque value is reached, the burr drive automatically
switches to counterclockwise.
If your dental treatment unit is equipped with the ApexLocator option, the
burr drive stops automatically when the set motor stop position is
reached. If the AutoReverse function is switched on, the next time the foot
pedal is activated following a motor stop, the motor is switched to
counterclockwise rotation. When the root canal file is withdrawn, the burr
drive automatically switches back to clockwise rotation.
Switching the torque signal and apex signal tones on/off
A beep is issued when approx. 75% of the set torque value is exceeded.
If your dental treatment unit is equipped with the ApexLocator option, a
beep is also issued when the apex or the set motor stop position is
reached. If the AutoReverse function is activated, three acoustic signals
are issued when the motor switches to counterclockwise rotation.
Remove file from sequence
Deletes the selected files from the sequence.
Memory key
Stores the settings of an endodontic treatment
10.4.4 Endodontics administration
Opening the sub-screen
Access from the
keys:
Creating a new endodontic treatment
Creating a new endodontic treatment
Up to five endodontic treatments can be saved.
Copy endodontic treatment
To reduce the amount of setting work required, you can copy an
Copy treatment, amount of setting work required
endodontic treatment and resave it under a different name. Then the
settings can be changed.
Rename endodontic treatment
Endodontic treatments can be renamed to facilitate corrections and
editing.
Delete endodontic treatment
Removes individual endodontic treatments from the treatment list.
Adding a file system
For importing stored file systems to the endodontic treatment list.
Treatment selection
program. See the following function
10 Overview of all function keys
10.4 Treatment program
279