Showing/Hiding The Key For The External Hf Surgical Unit; Switching Afterblow On/Off; Setting The Spray Temperature - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016

Showing/hiding the key for the external HF surgical unit

4.15.5.2
External HF surgical units may interfere with the dental treatment unit and
SIVISION monitor. Therefore, it is possible for the
units
key to be displayed in the
screen is highlighted in orange, the dental treatment unit is protected from
interferences resulting from the HF fields.
➢ Touch the
 If the key is highlighted orange, the
is displayed in the
As long as the suction removal system is required with the external HF
surgical unit during the treatment, the suction handpiece must be
removed from the holder before blocking the dental treatment unit. The
suction unit remains switched on until the block is removed and the
suction handpiece is put down again.
4.15.5.3

Switching afterblow on/off

After the foot control pedal has been released, the cooling spray
remaining in the instrument head or in the tip of the instrument can be
automatically blown out by briefly activating the chip blower.
➢ Touch the
 If the key is highlighted orange, the afterblow function is
activated.

Setting the spray temperature

4.15.5.4
The spray temperature of the instruments on the dentist element except
for the SPRAYVIT M multifunctional syringe can be adjusted.
The spray temperature of the multifunctional syringe SPRAYVIT M can
TENEO reference
be adjusted separately. See "Switching the instrument light on/off and
setting the water temperature." [ → 114]
➢ Use the – and + keys to set the spray temperature.
4.15 Configuration of the dental treatment unit (setup)
Start
sub-screen. If the key in the sub-
External HF surgical unit
Start
sub-screen.
Afterblow
key.
4 Operation
external HF surgical
key.
external HF surgical unit
key
197