Sirona teneo Operating Instructions Manual page 175

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
S
65 48 510 D3509
D3509.201.03.03.23 10.2016
4.13.2.4.2 Using the camera with SI Video
Using SI Video, up to four still images can be generated with the SiroCam
AF+ intraoral camera. These can be displayed on the SIVISION monitor
either as a sequence of single images or simultaneously as a quad
image. The active quadrant is marked with an orange square. The
quadrants are run through in a clockwise direction.
The generated still images remain until the dental treatment unit or the PC
is disconnected from the power supply.
➢ Remove the intraoral camera from the holder.
 The live image is displayed on the SIVISION monitor as a single
image. The
When the intraoral camera is put in the holder, the live image disappears
from the monitor. The generated still images remain displayed.
Operation of SI Video with the camera removed
With the camera removed, SI Video is controlled via the foot control and
the SIVISION program buttons.
Switching between live and still image
✔
The intraoral camera is removed from its holder.
1. Step on the foot pedal.
 The display switches from live to still image.
2. Press the foot pedal again.
 The live image is displayed again.
The function of focusing the camera image using the foot control can be
configured in the dental treatment unit setup, see "Switching on/off the
foot control function for intraoral camera focus" [ → 194]. If this function is
switched on, the foot pedal must be pressed down fully to switch between
live and still images.
Selecting the next quadrant
In order to produce another still image, another quadrant must be
selected. If a still image is already contained in the desired quadrant, it
can be replaced by a new image.
✔
The intraoral camera must be removed from its holder to allow for
operation via the foot control.
➢ Press the left button of the foot control.
or
Touch the
➢
 The orange square highlights the selected quadrant. When the
intraoral camera is removed, the live image is displayed.
4.13 SIVISION digital video system
SIVISION dialog
is displayed on the touchscreen.
Select next quadrant
key on the touchscreen.
4 Operation
175