Connecting The Mini L.e.d; Functional Description - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
E D C
A
65 48 510 D3509
D3509.201.03.03.23 10.2016

Connecting the Mini L.E.D.

4.6.7.3
The Mini L.E.D. is connected to the assistant element in holder 1.
B
1. Connect the supply cable A to the dental treatment unit.
2. Screw the hose coupling B onto the Mini L.E.D. C.
3. Screw the sterilized light guide B onto the Mini L.E.D. C. Make sure
to insert the fiber optic correctly.
 The fiber optic clicks into place audibly.
4. Slip the glare shield E onto the light guide D.
 The glare shield protects your eyes against reflecting curing light
4.6.7.4

Functional description

Controls
A
A Glare shield
B Fiber optics
C On/off button
D Status control lamp
E Quick curing mode light
Status control lamp
The status control lamp D signals the following states:
Status control lamp
Off
green
red, flashing
The Mini L.E.D. has three operating modes, which you can select with the
Mode
H key:
B
C
D
Mode
Instrument in holder
Normalbetrieb
Overheat protection
4.6 Assistant element
E G
I
F H
F Pulse curing mode light
G "Soft start" mode lamp
H Mode button
I Straight handpiece
J Supply cable
4 Operation
J
153