Sirona teneo Operating Instructions Manual page 287

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016
Increasing the travel speed of the patient chair
The travel speed can be increased for manual chair settings and
programmed movements of the chair.
Fine adjustment
Fine Adjustment
Displays the
activated, the patient chair moves more slowly when adjusted manually.
Chair program travel movements are always executed at maximum
speed.
Focusing the intraoral camera using the foot control
If this function is switched off, the display switches between a still or live
image when the foot pedal is pressed. The knob on the camera is used
to focus the image.
If the function is switched on, the camera image is focused when the foot
pedal is actuated. The display only switches between a still or live image
when the foot pedal is pressed down fully. The knob on the camera can
still be used to focus the image.
Cursor control
The cursor control can be set as follows:
● Field 1: Cursor control switched off
● Field 2: Cursor control switched on, without screen change
● Field 3: Cursor control switched on, with screen change
Number of user profiles
If fewer user profiles are required, their number can be limited so that only
the specified users can be selected after the dental treatment unit is
switched on.
Open next dialog page
Operating light
The operating light is automatically activated when the dentist element
approaches.
Cuspidor movement
This can be used to set the cuspidor so that it automatically moves inward
when the mouth rinsing position (S) chair program is selected.
Tumbler heater
A setting can be made so that the tumbler heater automatically switches
off when the entry/exit position (0) chair program is activated. The tumbler
heater switches back on as soon as the patient chair leaves the entry/exit
position.
Dentist element movement
A setting can be made to designate the chair programs for which a dentist
element movement can be additionally programmed:
● Field 1: The position of the dentist element is not added to any chair
program.
10 Overview of all function keys
10.7 Setup program
Start program
key in the . If this function is
287