No Ip Igmp Query-Max-Response-Time; Ip Igmp Robustness - Siemens SCALANCE XM-400 Configuration Manual

Layer 2 management protocols
8.2 IGMP
8.2.3.14

no ip igmp query-max-response-time

Description
With this command you reset the period of time in an IGMP query that the client has to
respond to a query to the default value.
Requirement
You are in the Interface Configuration mode of VLAN.
The command prompt is as follows:
cli(config-if-vlan-$$$)#
Syntax
Call the command without parameter assignment:
no ip igmp query-max-response-time
Result
The period of time is reset.
Further notes
You configure the time with the
You display the setting and other information with the
command.
8.2.3.15

ip igmp robustness

Description
With this command, you take into account the packet loss rate of a network..
Requirement
You are in the Interface Configuration mode of VLAN.
The command prompt is as follows:
cli(config-if-vlan-$$$)#
452
ip igmp query-max-response-time
show ip igmp global-config
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.