Show Ipv6 Ospf - Siemens SCALANCE XM-400 Configuration Manual

Layer 3 functions
9.3 OSPFv3 (IPv6)
Syntax
Call the command without parameters:

show ipv6 ospf

Result
The configuration is displayed.
9.3.1.2 show ipv6 ospf ... database ...
Description
This command shows information about a specific LSA type or all LSA types.
Note
This command is available only with layer 3.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show ipv6 ospf
database
prefix|link|nssa
}]
568
or
cli#
[area <AreaID>]
[ {
router|network|as-external|inter-prefix|inter-router|intra-
} ]
[{
detail|HEX
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11