No User-Account; User-Account-Ext - Siemens SCALANCE XM-400 Configuration Manual

11.1.4.5

no user-account

Description
With this command, you delete a user.
Note
Default users "admin" as well as logged in users cannot be deleted.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no user-account <user-name>
The parameter has the following meaning:
Parameter
user-name
Result
The user has been deleted.
Further notes
You create a user with the
You show the created users with the
11.1.4.6

user-account-ext

Description
With this command you link a user with a role in the table "External User Accounts". The
user is defined on RADIUS server. The roll is defined locally on the device.
When a RADIUS server authenticates a user, the corresponding group however is unknown
or does not exist, the device checks whether or not there is an entry for the user in the table
"External User Accounts". If an entry exists, the user is logged in with the rights of the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
User name
command.
user-account
show user-accounts
Security and authentication
11.1 User management
Range of values / note
Enter a valid user name.
command.
811