Show Ring-Redundancy; Show Ring-Redundancy Manager Counters - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

show ring-redundancy

With this command, you show the current configuration of the ring redundancy and standby

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show ring-redundancy

The current configurations are displayed.

With this command, you display the following information:

● How often the device as redundancy manager switched to the active status, i.e. closed

● The maximum delay time of the test frames of the redundancy manager.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show ring-redundancy manager counters

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

Layer 2 management protocols

8.5 Ring redundancy and standby connection