No Ip Igmp Immediate-Leave; Ip Igmp Last-Member-Query-Interval - Siemens SCALANCE XM-400 Configuration Manual

Layer 2 management protocols
8.2 IGMP
Further notes
You configure the IGMP version with the
You enable "Explicit Tracking" on an interface with the
command.
You disable the "Immediate Leave" function on an interface with the
leave
You display the setting and other information with the
command.
8.2.3.6

no ip igmp immediate-leave

Description
With this command, you disable "Immediate Leave" function on an interface.
Requirement
You are in the Interface Configuration mode of VLAN.
The command prompt is as follows:
cli(config-if-vlan-$$$)#
Syntax
Call the command without parameter assignment:
no ip igmp immediate-leave
Result
Die "Immediate Leave" function is disabled on the interface.
Further notes
You enable the "Immediate Leave" function on an interface with the
command.
You display the setting and other information with the
command.
8.2.3.7

ip igmp last-member-query-interval

Description
With this command you specify the period of time in which the multicast router searches for
further clients that want to receive a multicast after the last Leave message.
446
command.
command.
ip igmp version
ip igmp explicit-tracking
show ip igmp global-config
show ip igmp global-config
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
no ip igmp immediate-
ip igmp immediate-leave