Coordinates Longitude - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.1 System
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
coordinates latitude <latitude>
The parameter has the following meaning:
Parameter
latitude
Result
The latitude coordinate is created.
3.1.12.5

coordinates longitude

Description
With this command, you enter a longitude coordinate.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
coordinates longitude <longitude>
84
Description
Input box for the latitude coordinate
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
max. 32 characters
To use spaces in the entry, enter
the latitude coordinate in quotes:
coordinates latitude "123
456"
Configuration Manual, 06/2016, C79000-G8976-C252-11