Functions Specific To Scalance; Plug; The "Show" Commands; Show Plug - Siemens SCALANCE XM-400 Configuration Manual

Functions specific to SCALANCE

This part contains the sections that describe functions specific to SCALANCE.
4.1

PLUG

The C-PLUG or KEY-PLUG stores the configuration of a device and can therefore transfer
the configuration of the old device to the new device when a device is replaced.
In addition to the configuration, the KEY-PLUG also contains a license that enables the use
of certain functions.
This section describes commands relevant for working with the C-PLUG or KEY-PLUG.
4.1.1

The "show" commands

This section describes commands with which you display various settings.
4.1.1.1

show plug

Description
This command shows the current information of the PLUG.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show plug
Result
The current information of the PLUG is diplayed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
or
cli#
4
143