Primary-Domain - Siemens SCALANCE XM-400 Configuration Manual

5.4.3.2

primary-domain

Description
With this command, you specify the primary domain.
Requirement
You are in the PTP Transparent Clock configuration mode.
The command prompt is as follows:
cli(config-ptp-tc)#
Syntax
Call up the command with the following parameters:
primary-domain <domain-id(0-255)>}
The parameter has the following meaning:
Parameter
domain-id
Result
The primary domain is specified.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
The identifier of the primary domain.
System time
5.4 PTP Client
Range of values / note
0 ... 255
177