Send Test Mail; Smtp-Port - Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.9 SMTP Client
Result
The e-mail name of the sender is reset.
Further notes
You configure the e-mail name of the sender with the
You display the setting with the
7.9.2.5

send test mail

Description
With this command, you send an e-mail according to the currently configured SMTP settings.
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call the command without parameters:
send test mail
Result
An e-mail according to the currently configured SMTP settings is sent.
Further notes
You can display the current SMTP settings with the
7.9.2.6

smtp-port

Description
With this command, you configure an SMTP port.
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
418
sender mail-address
show events sender email
show events smtp-server
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
.
command.
command.