Show Spanning-Tree Interface - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call the command without parameters:
show spanning-tree detail
Result
The detailed settings for the spanning tree function are displayed.
6.3.1.5

show spanning-tree interface

Description
This command shows the settings of the ports for the spanning tree function.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show spanning-tree interface <interface-type><interface-id>
[{cost|priority|portfast|rootcost|restricted-role|
The parameters have the following meaning:
Parameter
interface-type
interface-id
cost
priority
portfast
rootcost
restricted-role
restricted-tcn
state
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
or
cli#
restricted-tcn|state|stats|detail}]
Description
Type or speed of the interface
Module no. and port no. of the interface
Shows the port costs used to calculate
the lowest-cost path.
Shows the priority of the port.
Shows whether
fast
Shows the costs of the path to the root
bridge.
Shows whether
stricted-role
Shows whether
stricted-tcn
Shows the status of the interface.
spanning-tree port-
is enabled.
spanning-tree re-
is enabled.
spanning-tree re-
is enabled.
Network structures
6.3 Spanning Tree
Range of values / note
Enter a valid interface.
-
-
-
-
-
-
-
237