Show Vrrp3 Interface; Show Vrrp3 Track - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Layer 3 functions

9.5 VRRPv3 (IPv4 / IPv6)

show vrrp3 interface

This command shows the settings of VRRP3 for the interface.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call up the command with the following parameters:

show vrrp3 interface [vlan <vlan-id(1-4094)>] [{brief|detail|statistics}]

The parameters have the following meaning:

For information on names of addresses and interfaces, refer to the section "Interface

identifiers and addresses (Page 42)".

The settings for the interface are displayed.

With this command, you display the configured interface tracking.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Keyword for a VLAN connection

Number of the addressed VLAN

shows brief information on VRRP

shows detailed information on VRRP.

shows the statistics of the VRRP pro-

Range of values / note

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11