Result
The current configuration of the selected error monitoring function is displayed.
12.1.3.4
show events faults status
Description
This command shows the status messages of fault monitoring of the power supply and
network connections.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events faults status
Result
A table with the status messages of the error monitoring functions is displayed.
12.1.3.5
show startup-information
Description
This command shows the startup information.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show startup-information
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
or
cli#
or
cli#
Diagnostics
12.1 Event and fault handling
887