Snmp Notify - Siemens SCALANCE XM-400 Configuration Manual

Parameter
UserName
security-model
Result
The details of the group are deleted.
Further notes
You change the details of an SNMP group with the
You display the created SNMP groups with the
You display the created SNMP user with the
7.8.2.12

snmp notify

Description
With this command, you configure the details of the SNMP notifications.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp notify <NotifyName> tag <TagName> type {Trap|Inform}
[{volatile|nonvolatile}]
The parameters have the following meaning:
Parameter
NotifyName
tag
TagName
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Name of the user
Specifies which security settings are
used for sending
show snmp user
Description
Name of the SNMP notification
Keyword for a target key
Name of the target key
Range of values / note
max. 32 characters
•
v1
•
v2c
•
v3
command.
snmp group
command.
show snmp group
command.
Range of values / note
max. 32 characters
-
max. 32 characters
Network protocols
7.8 SNMP
401