Rmon Collection History - Siemens SCALANCE XM-400 Configuration Manual

Diagnostics
12.5 RMON
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
no rmon collection stats <index (1-52)>
The parameter has the following meaning:
Parameter
index
Result
The recording of statistical data is ended.
12.5.3.3

rmon collection history

Description
With this command, you configure the collection of statistical data of the interface in a
selectable number of recording intervals ("Buckets ") with a specified period.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
rmon collection history<index(1-52)>
[buckets<bucket-number(1-65535)>]
[interval<seconds(1-3600)>]
[owner<ownername(127)>]
942
Description
Number of the recording
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
1 ... 52
Configuration Manual, 06/2016, C79000-G8976-C252-11