No Default-Information Originate Always - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
default-information originate always
[metric <metric-value (0-0xffffff)>]
[metric-type <type (1-2)>]
The parameters have the following meaning:
Parameter
metric
metric-value
metric-type
type
Result
The function is enabled.
Further notes
You disable the function with the
9.2.3.16

no default-information originate always

Description
With this command, you disable the function with which a standard route is always
generated for external routes into the OSPF routing domain.
Note
This command is available only with layer 3.
Requirement
You are in the OSPF Router configuration mode.
The command prompt is as follows:
cli(config-ospf)#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Keyword for the metric of the external
standard route.
Value of the metric
Keyword for the type of the external
standard route
Type of the external route
no default-information originate always
Layer 3 functions
9.2 OSPFv2 (IPv4)
Range of values / note
--
0-0xffffff
--
1 - type 1
•
External and internal costs
2 - type 2
•
External costs
command.
539