Show Ssl Server-Cert; Arp; The "Show" Commands; Show Ip Arp - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

show ssl server-cert

This command shows the SSL server certificate.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show ssl server-cert

The SSL server certificate is displayed.

This section describes commands of the Address Resolution Protocol (ARP).

This section describes commands with which you display various settings.

With this command, you display the IP ARP table.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

Network protocols