Load And Save - Siemens SCALANCE XM-400 Configuration Manual

3.2

Load and Save

This section describes commands for displaying, copying, saving and downloading files for
the device.
Note
Note that during the installation of a previous version, the configuration data can be lost. In
this case, the device starts up with the factory configuration settings after the firmware has
been installed.
Overview of the file types
File type
Config
ConfigPack
Debug
EDS
Firmware
GSDML
HTTPSCert
LogFile
MIB
RunningCLI
Script
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
This file contains the start configuration.
Among other things, this device contains the definitions of the users, roles,
groups and function rights. The passwords are stored the file "Users".
Detailed configuration information. for example, start configuration, users,
certificates
ZIP file consisting of the Config, Users and LSYS fle.
This file contains information for Siemens Support.
It is encrypted and can be sent by e-mail to Siemens Support without any se-
curity risk.
Electronic Data Sheet (EDS)
Electronic data sheets for describing devices in the EtherNet/IP mode
The firmware is signed and encrypted. This ensures that only firmware created
by Siemens can be downloaded to the device.
PROFINET information on the device properties
Default HTTPS certificates including key
The preset and automatically created HTTPS certificates are self-signed.
We strongly recommend that you create your own HTTPS certificates and
make them available. We recommend that you use HTTPS certificates signed
either by a reliable external or by an internal certification authority. The HTTPS
certificate checks the identity of the device and controls the encrypted data
exchange.
Certificates with a different format cannot be copied in.
File with entries from the event log table
Private MSPS MIB file
Text file with CLI commands
This file contains an overview of the current configuration in the form of CLI
commands. You can download the text file. The file is not intended to be up-
loaded again unchanged.
Text file with CLI commands
You can upload a script file in a device. The CLI commands it contains are
executed appropriately.
Configuration
3.2 Load and Save
109