The "Show" Commands; Show Events Config; Show Events Severity - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

The logging function is disabled on the console.

Further notes

You enable the setting with the

As default the function is "disabled".

The "show" commands

This section describes commands with which you display various settings.

This command shows the current configuration for forwarding the messages of the various

event types.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show events config

The current configuration of the events display is displayed.

This command shows the degree of severity of an event ("Info", "Warning" or "Critical")

starting at which a notification (sending of an e-mail, entry in the Syslog table, entry in the

Syslog file) is generated.

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

logging console

12.1 Event and fault handling