No Monitor - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call the command without parameters:
monitor
As default the function is "disabled".
Result
The port mirroring function is enabled.
Further notes
You can display the status of this function with the
You disable the function with the
12.4.2.2

no monitor

Description
With this command, you disable the port mirroring function.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no monitor
Result
The port mirroring function is disabled.
Further notes
You can display the status of this function with the
You enable the function with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
show monitor
command.
no monitor
show monitor
command.
monitor
Diagnostics
12.4 Port Mirroring
command.
command.
925