Tftp Save; Tftp Server - Siemens SCALANCE XM-400 Configuration Manual

3.2.5.6

tftp save

Description
With this command, you copy a file from the file system of the device to a TFTP server. The
TFTP protocol is used for the transfer. You can also display a list of available files.
Requirement
● The name of the file is specified
● You are in the LOADSAVE configuration mode.
The command prompt is:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
tftp save {showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
Result
The file types are displayed or the file is copied.
Further notes
You configure the name of the file with the
With the "
3.2.5.7

tftp server

Description
With this command, you configure the access to a TFTP server.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Shows the available files
Keyword for a file type to be loaded
Name of the file type
" command, you can display the file types.
show loadsave files
Range of values / note
-
-
max. 100 characters
command.
tftp filename
Configuration
3.2 Load and Save
119